Safe explosion-proof Dry type static electricity remove bar For printing machine,lamination machine
Dry type New type Nano induction static remove bar, need to be equipped with ion generator. the ion induction electrostatic eliminating cable ends inserted into the ion generator output jack, at the end of clockwise, then the induction electrostatic eliminating bar wiring line is connected to the outside parties of grounding screw ion generator , after confirm the good grounding, insert the plug of the generator into the socket which with ground wire,,then fixed The electrostatic eliminating on the suitable position,open the generator power supply , static elimination and be able to start working
Product Feature
- Quickly neutralizes static.
- Large ion airflow coverage area
- The static elimination device has good grounding protection.
Technical Parameter
|
Operating Voltage |
7.0KV |
|
Current Consumption |
0.52uA |
|
Operating Temperature |
22-25°C |
|
HV Cable length |
3 Meters |
|
Max. Length |
6M (customized) |
|
Humidity |
≤60Percent RH |
Test result:
|
Distance |
Decay Time |
|
|
30mm |
+0.3s |
-0.3s |
|
50mm |
+0.7s |
-0.8s |
|
80mm |
+0.1s |
-1.3s |
|
Test Voltage: 5KV to 500V |
||
1. Destaticizing time meet the ESD standard, testing voltage from 5000v to 500v
2. Test Result based on ME268A electrostatic test meter
3. Test results will be a little different due to condition, Temperature and humidity etc
Safe Instruction :
1. Read operation manual before installation.
2. Make sure grounded well before operation.
3. Please don’t use this device in flammable and combustible environment.
4. Don’t allow to repair it without permit.
5. Power supply must be connected with machine, opened and closed with machine.
6. Pressure air must be clean without water vapour and impurity
Application:
Widely used in electronics, plastic,chemical,printing, packaging and optoelectronics industries.
